Application of individualized setting of femoral opening point and valgus angle in artificial total knee arthroplasty for patients with external femoral arch / 中国骨伤

OBJECTIVE@#To investigate whether shifting the femoral opening point and setting a personalized femoral valgus angle can improve the lower limb force line of total knee arthroplasty (TKA) patients with external femoral arch.@*METHODS@#From March 2016 to October 2018, 50 patients (55 knees) with osteoarthritis with genu varus deformity combined with external femoral arch for TKA were selected. There were 10 males and 40 females. The age ranged from 63.1 to 80.5 years old, with an average of (67.8±5.8) years old. Forty-five cases were unilateral and 5 cases were bilateral. The osteoarthritis stages of 55 knees were Kellgren-Lawrence grade Ⅲ to Ⅳ; and the course of disease ranged from 2 to 10 years. PreoperativeSpecial Surgery (Hospital for Special Surgery) scores:pain was 15.20±3.52; function was 8.30±2.96;mobility was 10.15±2.85;muscle strength was 4.20±1.95;flexion deformity was 5.50±3.05;stability was 6.15±2.20; total score was 47.93±3.39. The external femoral arch angle ranged from 6.4° to 16.7°, with a mean of (10.63±2.29) °. The tibiofemoral angle ranged from 7.4° to 12.6°, with a mean of (12.04±3.59)°. The anatomical distal femoral angle ranged from 83.10° to 91.20°, with a mean of (84.55± 1.66)°. And the distance from the center of the knee joint to the lower limb line of force ranged from 2.01 to 6.00 cm, with a mean of (3.57±1.12) cm. During the replacement surgery, the femoral opening point and the valgus angle were individually set to obtain a good line of force of the lower limbs.@*RESULTS@#Before the operation, the distance of femoral opening point ranged from 0.24 to 0.74 cm, with a mean of (0.54±0.10) cm. The distance between the internal and external condyles of the femur ranged from 6.86 to 8.12 cm, with a mean of (7.27±0.27) cm. The preoperative valgus correction angle (VCA) ranged from 7.20° to 13.80°, with a mean of (9.38±1.38) °. The post-correction valgus correction angle' (VCA') ranged from 6.10° to 9.50°, with a mean of (7.36±0.82) °. All patients were followed up, and the duration ranged from 3 to 36 months, with an average of (13.5±5.8) months. All patients obtained good knee function after operation. Three months after operation, HSS scores included pain of 25.30±3.05, function of 18.25±2.05, mobility of 16.05±0.75, muscle strength of 6.20±2.10, flexion deformity of 8.80±1.85, stability of 8.20±1.75; and the total score ranged from 90.00 to 93.00, with an average of 91.82±0.98. The total score was higher than that before operation (@*CONCLUSION@#In TKA combined with external femoral arch, good lower limb force line and knee joint function can be obtained by externally shifting the femoral opening point and setting a personalized femoral valgus angle.

Análisis y plan quirúrgico de deformidades en tobillo y retropié del adulto / Analysis and surgical planning in ankle and hindfoot adult deformities

La corrección de deformidades en extremidades inferiores del adulto sigue siendo un capítulo desafiante en ortopedia y traumatología. El conocimiento del alineamiento normal de las extremidades inferiores y su comportamiento son fundamentales para una adecuada planificación quirúrgica y éxito del tratamiento, especialmente en tobillo y retropié. El objetivo de esta revisión, es conocer los principios fundamentales de la corrección de deformidades, orientar en que factores fijarse al momento de corregir y poder dar una guía de cómo planificar la cirugía, particularmente en deformidades de tobillo y retropié. NIVEL DE EVIDENCIA: Nivel V.

Adult lower limb deformity corrections remain a challenging chapter in orthopedic surgery. The knowledge of the normal lower limb alignment and their behavior is essential for a proper surgical planning and treatment success, especially on foot and ankle surgery. The objective of this review is to show the main principles of deformity correction, to guide the factors to consider when correcting and to provide a surgical planning guide, particularly in the ankle and hind foot deformities.

Relationship of Subchondral Plate-Rod Structure and Cartilage Degeneration with Lower Limb Alignment / 医用生物力学

Objective To study the relationship of the tibial plateau subchondral trabecular bone (STB) microstructure and the cartilage degeneration with the lower limb alignment based on individual trabecula segmentation (ITS) and histology analysis in knee osteoarthritis (OA). Methods Hip-knee-ankle (HKA) angles were measured on the full-length lower extremity films of patients before total knee arthroplasty (TKA). The tibial plateau excised from the TKA were collected for micro-CT scanning and ITS analysis. The cartilage degeneration was evaluated by histology. The relationship between the HKA angle and the changes in microstructural parameters of STB and cartilage degeneration were analyzed. ResultsThe plate, rod and axial bone trabecular volume fraction (BV/TV, pBV/TV, pBV/TV), ratio of trabecular plate versus rod (P/R), plate trabecular number density (pTb.N), plate trabecular thickness (pTb.Th), trabecular plate surface area (pTb.S), trabecular rod length (rTb.L), and plate-plate and plate-rod junction density (P-P Junc.D, P-R Junc.D) of the subchondral bone of the tibial plateau were significantly related to the cartilage degeneration OARSI score and the HKA angle. The greater the deviation of the lower limb alignment, the greater the number of subchondral trabeculae, the thicker the trabeculae, the greater the bone mass, the stronger the connectivity, especially the plate trabeculae on the affected side of tibial plateau, and the higher the OARSI score of cartilage degeneration. Conclusions Abnormal lower limb alignment may cause abnormal microstructure of the plate and rod STB of the tibial plateau by changing the stress distribution of the knee, especially the significant increase and thickening of the plate trabecular and axial trabecular bone, which may be an important risk factor that further aggravates the degeneration of articular cartilage and the progress of OA. Therefore, lower limb alignment correction with surgical intervention and improving STB with bone metabolism agents may efficiently contribute to preventing cartilage damage and mitigate OA progression.

Role and efficacy of picture archiving and communication system-assisted preoperative planning in total knee arthroplasty / 中国组织工程研究

BACKGROUND: In clinical application, Picture Archiving and Communication System gradually replaces the traditional preoperative planning mode of acetate template measurement on film, which can accurately obtain the parameters needed in the operation of total knee arthroplasty. OBJECTIVE: To evaluate the usage of Picture Archiving and Communication System in planning and assessment pre- and post-operatively in total knee arthroplasty. METHODS: Severe knee osteoarthritis patients who undertook total knee arthroplasty in Wuxi People's Hospital affiliated to Nanjing Medical University from March 2016 to March 2018 were included in the study. The patients were randomly divided into two groups. In the trial group (n=32), osteotomy was performed by Picture Archiving and Communication System, and then patients were implanted with knee prosthesis. In the control group (n=32), the osteotomy was performed according to the X-ray film, and then the artificial knee joint prosthesis was implanted. The trajectory of the tibia was tested during the operation. Anteroposterior and lateral X-ray films of the knee and the whole length films of the lower limbs were reexamined postoperatively. Tibial plateau inclination angle and valgus or varus angle were measured through Picture Archiving and Communication System. Recovery of lower limb alignment was assessed. Hospital for special surgery knee score on the affected side was analyzed to evaluate the recovery of joint function at postoperative 1, 3 and 12 months. This study was approved by the Ethics Committee of Wuxi People's Hospital affiliated to Nanjing Medical University. RESULTS AND CONCLUSION: (1) The satisfaction rate of lower limb alignment and the excellent and good rate of patellar movement trajectory were higher in the trial group than in the control group (100%, 91%; 100%, 94%, P 0. 05). (2) Hospital for special surgery knee score was higher in the trial group than in the control group at postoperative 1 and 3 months [(80. 5±9. 06), (74. 0±6. 42), P 0. 05). (3) No complications or adverse reactions related to implant occurred after operation. (4) Results indicated that personal osteotomy data can be obtained through Picture Archiving and Communication System in the total knee arthroplasty so as to improve the accuracy of osteotomy, better correct the lower limb alignment, obtain excellent patellar trajectory, and obtain better early curative effect of operation. The follow-up results within 1 year were satisfactory. The long-term effect remains to be further observed.

Application of computer navigation in total knee Arthroplasty / 中国组织工程研究

BACKGROUND: With the development of precision medicine, knee replacement under navigation has been paid more and more attention. Precision medicine allows for more accurate implant placement and better limb alignment. However, precision medicine can also make surgery much longer. OBJECTIVE: To evaluate the application of Aesculap Ortho-Pilot non-image-dependent wireless navigation in total knee arthroplasty. METHODS: Data of 42 patients with unilateral knee osteoarthritis admitted to the First Affiliated Hospital of Anhui Medical University from April to November 2017 were retrospectively collected. First total knee arthroplasty was conducted by the same surgeon. According to surgical methods, the patients were divided into two groups: The navigation group (n=21) received a total knee arthroplasty under the assistance of Ortho-Pilot non-image-dependent wireless navigation, and the non-navigation group (n=21) received a regular total knee arthroplasty. Operation time and drainage volume were recorded in both groups. X-ray film of weight bearing was taken 12 months after operation. Mechanical axis of the lower extremity, the mechanical proximal medial proximal angle of the mechanical shaft of the tibia, the distal lateral angle of the femoral mechanical axis, sagittal tibial component angle and the number of alignment deviation of the lower extremity (>3°) were compared between the two groups. Knee range of motion and Hospital for Special Surgery knee score were evaluated. This study was approved by the Ethics Committee of First Affiliated Hospital of Anhui Medical University. RESULTS AND CONCLUSION: (1) Operation time was longer in the navigation group than in the non-navigation group (P 3° and the variables of medial angular separation of proximal end of the mechanical axis of the tibia between the two groups (P > 0.05). (3) At postoperative 12 months, the range of motion was larger in the navigation group than in the non-navigation group (P 0.05). (4) Results suggested that total knee arthroplasty assisted by computer navigation can improve the accuracy of lower limb alignment, accuracy of prosthesis placement and knee range of motion. However, the operation time was improved, so the advantages and disadvantages should be considered comprehensively.

Advantages of individualized open wedge high tibial osteotomy in treatment of medial compartment knee osteoarthritis / 中国组织工程研究

BACKGROUND: Open wedge high tibial osteotomy can achieve significant clinical efficacy for patients with medial compartment knee osteoarthritis and genu varus. However, Fujisawa point has been recognized as a reference for the correction of lower limb alignment. Can individualized orthopedics in lower limb alignment obtain better clinical efficacy? OBJECTIVE: To explore short-term efficacy of individualized orthopedics in lower limb alignment for medial compartment knee osteoarthritis through open wedge high tibial osteotomy. METHODS: Totally 46 patients with medial compartment knee osteoarthritis treated by open wedge high tibial osteotomy from June 2016 to May 2018 in Department of Orthopedics, Wuxi People's Hospital were enrolled in this study. X-ray and MRI were used to evaluate the knee and I-III degeneration grades were classified. Patients at Grade I and II were randomly divided into individualized orthopedics group and control group with 16 cases in each group. Patients at grade III were classified as Fujisawa group with 14 cases. In the individualized orthopedics group, mild grade I and moderate grade II respectively corrected lower limb alignment to 50% and 55% of lateral tibial plateau, while control group and Fujisawa group all corrected the alignment to 62.5% point. Postoperative lower limb alignment, pre- and post-operative range of motion, femoral-tibial angle and medial proximal tibial angle of the knee were measured and evaluated. The hospital for special surgery score and the Western Ontario and McMaster Universities osteoarthritis index score were followed up before operation, 3, 6 and 12 months after operation, while postoperative self-satisfaction of patients was also compared. RESULTS AND CONCLUSION: (1) All patients were followed up for 12 months. (2) Three groups achieved satisfactory lower limb alignment. Range of motion and medial proximal tibial angle increased and femoral-tibial angle decreased at postoperative stage (P 0.05). (4) All patients were satisfied with the surgical efficacy. Postoperative self-satisfaction scores of individualized orthopedics group were superior to that of control group (P < 0.05). (5) According to the results, individualized open wedge high tibial osteotomy is benefit to obtain early functional rehabilitation of the knee through accurate correction of lower limb alignment. It can also improve patient satisfaction.

Research progress on the application of lower limb alignment in discoid meniscus injury / 中国骨伤

Discoid meniscus injury is a kind of common sports injury. Its treatment methods include arthroscopic discoid meniscus plasty, discoid meniscus subtotal resection, discoid meniscus total resection and so on. Although the short-term clinical effect is good, the long-term clinical effect is not ideal. At present, different scholars have different views on the choice of surgical methods for discoid meniscus injury. In recent years, many scholars have shown that the choice of operation and the change of lower limb force line are related to the therapeutic effect of discoid meniscus injury. This paper mainly summarizes the current situation of the treatment of discoid meniscus injury and the changes of the force line of the lower limbs after operation, and expounds therole of the evaluation of the force line of the lower limbs in the treatment of discoid meniscus, so as to provide the basis for the clinical individualized treatment of discoid meniscus injury.

Effect of three-dimensional printing guide plate on improving femoral rotational alignment and patellar tracking in total knee arthroplasty / 中国修复重建外科杂志

Objective: To investigate the effect of three-dimensional (3D) printing guide plate on improving femoral rotational alignment and patellar tracking in total knee arthroplasty (TKA). Methods: Between January 2018 and October 2018, 60 patients (60 knees) with advanced knee osteoarthritis who received TKA and met the selection criteria were selected as the study subjects. Patients were randomly divided into two groups according to the random number table method, with 30 patients in each group. The TKA was done with the help of 3D printing guide plate in the guide group and following traditional procedure in the control group. There was no significant difference in gender, age, disease duration, side, and preoperative hip-knee-ankle angle (HKA), posterior condylar angle (PCA), patella transverse axis-femoral transepicondylar axis angle (PFA), Hospital for Special Surgery (HSS) score, and American Knee Society (AKS) score ( P>0.05). Results: All incisions healed by first intention and no complications related to the operation occurred. All patients were followed up 10-12 months, with an average of 11 months. HSS score and AKS score of the two groups at 6 months after operation were significantly higher than those before operation ( P0.05). Postoperative X-ray films showed that the prosthesis was in good position, and no prosthesis loosening or sinking occurred during follow-up. HKA, PCA, and PFA significantly improved in the two groups at 10 months after operation compared with those before operation ( P<0.05). There was no significant difference in HKA at 10 months between the two groups ( t=1.031, P=0.307). PCA and PFA in the guide group were smaller than those in the control group ( P<0.05). Conclusion: Application of 3D printing guide plate in TKA can not only correct the deformity of the knee joint and alleviate the pain symptoms, but also achieve the goal of the accurate femoral rotation alignment and good patellar tracking.

Coronal lower limb alignment in total knee arthroplasty / 中华外科杂志

Many factors contribute to a successful total knee arthroplasty, and postoperative coronal lower limb alignment has always been a focus of joint surgeons. Previous researches have suggested that neutral alignment can bring higher prosthesis survival rate and better knee function. However, the theory has been challenged in recent years.In this article, the author introduces the axis, alignment and osteotomy of total knee arthroplasty briefly and reviews the studies on the neutral alignment and kinematic alignment of recent years in order to provide some advice for the clinical operation.

Revision of Schatzker type Ⅵ tibial plateau fracture failure focus on the recovery of lower limb alignment / 中华外科杂志

Objective@#To explore the influence of the lower extremity abnormal alignment and the joint surface, and to explore the surgical skills.@*Methods@#Twenty-two cases of tibial plateau Schatzker Ⅵ fracture internal fixation failure revision from January 2012 to January 2017 in Department of Orthopedics, Shanghai 10th Hospital.One year follow-up after initial surgery to make sure of failure.Three-dimensional CT scan, radiography, infection index, gait analysis, knee joint ROM, femur tibia angle, tibial plateau tibial shaft angle and posterior slope if tibial plateau were observed. The medial approach and bi-planer osteotoma were used.Autogenous iliac bone graft, postoperative fast recovery channel were used.Follow-up point included preoperative and postoperative 7 days, 6 weeks, 3 months, and 6 months.Obvervational index included double lower limbs radiography, knee society score(KSS), complications such as infection, skin necrosis, joint main passive activity, double lower limbs alignment the last follow-up SF-36 scale.Rate was compared by χ2 test, measurement data using paired sample t test.Correlation was analyzed by Pearson correlation regression testing.@*Results@#Twenty-two patients received follow-up.KSS, more than 21 cases were benign, with good gait.One case was poor, with claudication gait.Not skin necrosis, no deep infection cases, 1 case get blisters 2 days postoperatively, and disappear after 5 days with detumescence and cold therapy.Whether restoring force line affect the KSS significantly(χ2=22.000, P=0.000). Knee joint ROM, SF-36 score, KSS and lower limb alignment were improved significantly. In different individual the articular surface and anatomical angle recovered greatly but the posterior slope angle was quite difference which has no correlation with KSS and SF-36 scale(P>0.01).@*Conclusions@#Revision of Schatzker type Ⅵ tibial plateau fracture failure should focus on the recovery of lower limb alignment.moderate overcorrect bone cutting and joint surface height can bring benefits to the postoperative knee function.Revision surgery patients have greater psychological pressure, more early psychological intervention is necessary.

Radiologic Outcomes According to Varus Deformity in Minimally Invasive Surgery Total Knee Arthroplasty

PURPOSE: To identify the accuracy of postoperative implant alignment in minimally invasive surgery total knee arthroplasty (MIS-TKA), based on the degree of varus deformity. MATERIALS AND METHODS: The research examined 627 cases of MIS-TKA from November 2005 to December 2007. The cases were categorized according to the preoperative degree of varus deformity in the knee joint in order to compare the postoperative alignment of the implant: less than 5degrees varus (Group 1, 351 cases), 5degrees to less than 10degrees varus (Group 2, 189 cases), 10degrees to less than 15degrees varus (Group 3, 59 cases), and 15degrees varus or more (Group 4, 28 cases). RESULTS: On average, the alignment of the tibial implant was 0.2+/-1.4degrees, 0.1+/-1.3degrees, 0.1+/-1.6degrees, and 0.3+/-1.7degrees varus, and the tibiofemoral alignment was 5.2+/-1.9degrees, 4.7+/-1.9degrees, 4.9+/-1.9degrees, and 5.1+/-2.0degrees valgus for Groups 1, 2, 3, and 4, respectively, in the preoperative stage, indicating no difference between the groups (p>0.05). With respect to the accuracy of the tibial implant alignment, 98.1%, 97.6%, 87.5%, and 86.7% of Groups 1, 2, 3, and 4, respectively, had 0+/-3degrees varus angulation, demonstrating a reduced level of accuracy in Groups 3 and 4 (p0.05). CONCLUSION: Satisfactory component alignment was achieved in minimally invasive surgery in total knee arthroplasty, regardless of the degree of varus deformity.

A correlation between osteophytes in knee-joint and lower limb alignment in adult patients with Kaschin-Beck disease / 中华地方病学杂志

Objective To evaluate the correlation between osteophytes size and lower limb alignment in the knees of patients with Kaschin-Beck disease (KBD).Methods A total of 300 clinically diagnosed patients with KBD were X-rayed on knee-joints which ranged from the distal half of femur to proximal half of tibia.Meanwhile some related parameters in the X film with the anteroposterior position (including osteophytes length,femorotibial angle,femorotibial joint space ratio of inner side to outer side) were measured by DICOM 2.0,a software of medical graphic measuring,then followed by calculating the osteophyte spur index.The association between femorotibial angle,femorotibial joint space ratio and osteophytes spur index was evaluated by Pearson correlation test.Results The average of femorotibial angle of all the tested knee-joints was (165.97 ± 4.02)°,which positively correlated with both the osteophyte spur index of the medial femoral condyle [(6.54 ± 3.12)％,correlation coefficient (r) =0.524,P＜0.01] and the osteophyte spur index of medial tibil plateau [(7.14 ± 3.40)％,r =0.578,P ＜0.01].The femorotibial joint space ratio was 0.61 ± 0.13,which positively correlated with both the osteophyte spur index of medial femoral condyle (r =0.531,P ＜0.01) and that of the medial tibil plateau (r =0.563,P ＜0.01).Conclusions The results of this study indicate that there is a positive correlation between lower limb alignment and osteophyte size of both the medial femoral condyle and the medial tibial plateau.This finding may be evidenced by the fact that the changes of lower limb biomechanics may contribute to formation and development of osteophytes in the kneejoint.

Intra-and interobserver reliability of analysis of lower limb alignment on digital images using AutoCAD / 中国基层医药

Objective To evaluate intra-and interobserver reliability of analysis of lower limb alignment on DR digital images using AutoCAD.Methods Angles on AP view and long leg view were measured three times by two trained observers separately using these two methods in 140 knees.The intra-and interobserver intraclass correlation coefficients with 95% CIs of two methods were calculated and compared with Fisher z transformation and Z test.Paired t test was used in comparing time consumption.Results For AutoCAD method,inter ICCs were 0.942? 0.993 ,intra ICCs were 0.937～0.999.For X-ray films method,inter ICCs were 0.736～0.981,intra ICCs were 0.759～0.951.Corresponding ICCs of AutoCAD method were higher than those of X-ray films method,most of which had significant differences(P<0.01).The consuming time of two observers in measuring one knee using AutoCAD method was 89.6 seconds and 94.3 seconds shorter than those using X-ray films method respectively.Both had significant differences(P<0.01).Conclusion It was a fast reliable method to assess lower limb alignment on DR digital images using AutoCAD.